Home > Battery Testing Equipment >

IEC 62133 Lithium Battery Test System with Explosion Proof Chamber

Product Categories

Electrical Appliance Testing Equipment [376]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [136]
Battery Testing Equipment [67]
Switch Life Tester [271]
Led Testing Equipment [71]
Water Ingress Testing Equipment [83]
Environmental Test Chamber [106]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC 62133 Lithium Battery Test System with Explosion Proof Chamber

Name: IEC 62133 Lithium Battery Test System with Explosion Proof Chamber
Brand: Sinuo
Price: 1 USD

China IEC 62133 Lithium Battery Test System with Explosion Proof Chamber factory

Brand Name : Sinuo

Model Number : SN552B

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Negotiation

Payment Terms : T/T

Supply Ability : 10 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Plywood

Applied standards : IEC 62133-7

Chamber size : 500*500*500mm

Outer box material : Cold-rolled plate

Inner box material : Stainless steel

Power supply : AC 220V±10%, 50Hz

Weight : Approx 200kg

Warranty : 1 year

Meterial : Metal

Contact Now

IEC 62133 Lithium Battery Test System with Explosion Proof Chamber

Product information For Lithium Battery Test System with Explosion Proof Chamber:

Battery overcharge and over-discharge explosion-proof box is mainly used for battery overcharge and over-discharge, charge and discharge test, the battery is placed in the explosion-proof box, external charge and discharge test equipment, the operator and the instrument for protection.

Technical Parameters For Lithium Battery Test System with Explosion Proof Chamber:

Equipment size	Test chamber size per layer: 500500500 (DWH),( Three zones structure, can be customized. Outer box size: 7107802060mm (WDH)
Equipment Material	Outer box: 1.5MM thick cold-rolled plate and high-temperature double-sided baking paint treatment. Inner box: SUS # 304 stainless steel, thickness 1.00MM thick.
Box load-bearing capacity	The bottom load capacity is not less than 150KG, the second/third layer load capacity is not less than 50KG
Equipment box door	Single door, double door, inner box door is made of stainless steel, and add silicone strip to tighten, open visual observation window on the front The door is connected to the box by strong hinges, while each door adds an explosion-proof hinge, the right end of the chain is fixed in the latch side to prevent the explosion-proof box and door separation, effectively protecting the safety of testers
Observation Window	Double tempered glass, tempered glass thickness of 10MM, double tempered glass between the addition of steel wire grid in the explosion can do traction, while preventing the glass explosion when the glass splash injury testers situation. Observation window sealing using 3M glass adhesive for sealing
Box protection	The test chamber is fully laminated with Teflon tape inside to effectively prevent corrosion, insulation, flame retardant and easy to clean.
Wire loading port	Each layer of the box on the left and right sides of each open a round loading line mouth, Ф50MM diameter, easy to test the connection line through
Exhaust	Each layer of the box back are installed with exhaust fans and leave the exhaust guide (diameter 100MM), can be connected to the laboratory powerful extraction fan
Lighting	Each layer of the box is installed with lighting device, convenient to observe the specimen. Individual test panels to control lighting and exhaust in each test chamber.
Heat insulation protection	Insulation design between each layer can avoid mutual influence test.
Weight	Approx 200kg
Power supply	AC 220V±10%, 50Hz

IEC 62133 Lithium Battery Test System with Explosion Proof Chamber

Product Tags:

Testing Rotating Spits Stationary Ovens

4.5kg Load Spits Stationary Ovens

IEC 62133 Lithium Battery Test System with Explosion Proof Chamber Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!