IEC 60245-2 Two-Wheel And Three-Wheel Flexing Testing Machine For Cables Strength Test
Product Infromation:
Standard: IEC60245-1-2008 ”Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements” clause 5.6.3.1
IEC60245-2-1998” Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods” clause 3.1 and figure 1, clause 3.5 and figure 6
IEC60227-1:2007 ”Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements” clause 5.6.3.1
IEC60227-2:2003 ”Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods” clause 3.1 and figure 1
Specimen and limitations: Finished flexible cables, TUV, VDE, UL and other highly flexible cables.
Test purpose: It is used for bending mechanical strength test of finished flexible cables. This test is not applicable to cables with more than two concentric layers whose nominal conductor cross-section exceeds 18 cores.
Test principle: The 5m long sample moves back and forth within a 1m stroke through a pair of pulleys to achieve the bending test of wires and cables. By switching the two- and three-wheel clamps and adjusting the running speed, the two-wheel and three-wheel bending tests of cable samples can be achieved.
Technical Parameters:
| Control system | PLC + windows system control |
| Operation interface | Industrial computer of 12 inches or above, color screen, with WIFI, can be connected to the Internet, and data can be formed into reports and printed directly |
| Test items | Compatible with two-wheel and three-wheel bending, achieved by switching the clamp 1. No-load test (cables with more than five cores are not subject to current-carrying test) 2. Single-phase cable test 3. Three-phase cable testing |
| Load current | 0.1-35A |
| Load voltage | Single-phase AC0-250V, adjustable Three-phase AC0-430V, adjustable |
| Test speed | Two-wheel bending speed: 0.33m/S, adjustable Three-wheel bending speed: 0.1m/S, adjustable |
| Test stroke | More than 1 meter, fixed stroke |
| Number of tests | 0-999999, can be preset |
| Applicable wire core | 2-18 |
| Applicable wire diameter | 0.2-4 mm² |
| Fixture | 
|
| Pulley diameter | Two-wheel pulley: 60, 80, 120, 160, 200 mm (round bottom) Three-wheel pulley: 40, 45, 50 mm (round bottom) |
| Weights | Two-wheel: According to standard table 1 0.5-9Kg, stacked combination Three-wheel: According to standard table 3 calculated at 28N/mm², standard 21, 28, 42N |
| Fault detection | Current break, short circuit between conductors, short circuit between sample and pulley, sound and light alarm |
| Power supply | AC380V±10%/50-60Hz |
| Equipment size | WDH=1600X700X1600mm |
| Equipment weight | About 300kg |
Product Tags:
|
|
IEC 60245-2 Two-Wheel And Three-Wheel Flexing Testing Machine For Cables Strength Test Images
|
